Skip to Page Content
Delaware.gov Governor | General Assembly | Courts | Elected Officials | State Agencies
  Photo: Featured Delaware Photo
 
 
  Phone Numbers   Mobile   Help   Size   Print   Email

Skip Navigation LinksDNREC : Division of Air Quality : Reg 2 Forms Building Blocks

 
7 DE Admin. Code 1102 Application Forms (to be used for Natural Minor and Synthetic Minor Permitting)

 

The Division of Air Quality uses a building block approach to permit applications. This building block approach allows you to custom-design your application to meet your specific project needs. There are five categories of forms in the application form series. All 7 DE Admin. Code 1102 applicants other than auto body shops, dry cleaners, gasoline dispensing facilities, gasoline tank truck (delivery vessel) operators, and air stripping/soil venting operations will use this series.  If you are an auto body shop, dry cleaning facility, gasoline dispensing facility, gasoline tank truck (delivery vessel) operator, or air stripping/soil venting operationclick here to proceed directly to your forms. If not, please continue on for further instructions. If you do not need further instructions, click here to proceed directly to a table of the forms.

PLEASE NOTE: All forms should be saved to your computer before you begin filling them out.

All 7 DE Admin. Code 1102 applications must include one AQM-1: Administrative Information form. This form provides all of the administrative information regarding your application. Instructions for Form AQM-1 are also provided.

All 7 DE Admin. Code 1102 applications must include an AQM-2: Overall Process Flow Diagram form for EACH process being applied for. This form provides the overall process flow and indicates which forms are being included in the application.

Example AQM-2 forms for different processes are provided below:
AQM-2: Example Silo to Baghouse Process Flow Diagram
AQM-2: Example Coating Operation to RTO Process Flow Diagram
AQM-2: Example Stone Crusher Powered by Engine Process Flow Diagram

All 7 DE Admin. Code 1102 applications must include one AQM-3: Process Equipment form for EACH emission unit in EACH process being applied for. These forms provide emission units specific information.  If the emission unit does not meet one of the specific types listed in AQM-3.2 through AQM-3.12, use the AQM-3.1: Generic Process Equipment Application form.

AQM-3.1: Generic Equipment Application
Instructions for Form AQM-3.1

AQM-3.2: Boiler Application
Instructions for Form AQM-3.2

AQM-3.3: Generator/Engine Application
Instructions for Form AQM-3.3

AQM-3.4: Coating Operations Application
Instructions for Form AQM-3.4

AQM-3.5: Volatile Organic Storage Tank Application
Instructions for Form AQM-3.5

AQM-3.6: Cold Solvent Cleaner (Degreaser) Application
Instructions for Form AQM-3.6

AQM-3.7: Silo Application
Instructions for Form AQM-3.7

AQM-3.8: Used Oil Heater Application
Instructions for Form AQM-3.8

AQM-3.9: Crushed Stone Equipment Application
Instructions for Form AQM-3.9

AQM-3.10: Fines Crusher Application
Instructions for Form AQM-3.10

AQM-3.11: Crematories Application
Instructions for Form AQM-3.11

AQM-3.12: Printing Operations Application
Instructions for Form AQM-3.12

AQM-3.13: Grain Terminal, Elevator, and Drying Application
Instructions for Form AQM-3.13

If a process being applied for includes a control device, the application must include one AQM-4: Control Device form for EACH control device in EACH process being applied for.  These forms include control device specific information.

AQM-4.1: Incinerator, Afterburner, and Oxidizer Application
Instructions for Form AQM-4.1

AQM-4.2: Adsorption Equipment Application
Instructions for Form AQM-4.2

AQM-4.3: Flare Application
Instructions for Form AQM-4.3

AQM-4.4: Scrubber Application
Instructions for Form AQM-4.4

AQM-4.5: Inertial and/or Cyclone Collector Application                                                                                                                                                                           Instructions for Form AQM-4.5

AQM-4.6: Baghouse Application
Instructions for Form AQM-4.6

AQM-4.7: Electrostatic Precipitator Application
Instructions for Form AQM-4.7

AQM-4.8: Venturi Scrubber Application
Instructions for Form AQM-4.8

AQM-4.9: Selective Catalytic Reduction (SCR), Selective Non-Catalytic Reduction (SNCR), Non-Selective Catalytic Reduction (NSCR), and Ammonia Injection Application
Instructions for Form AQM-4.9

AQM-4.10: Settling Chamber Application
Instructions for Form AQM-4.10

AQM-4.11: Knockout Application
Instructions for Form AQM-4.11

All 7 DE Admin. Code 1102 applications must include one AQM-5: Emissions Information form for EACH process being applied for. This form includes emissions information for each emission point and process. Instructions for Form AQM-5 are also provided.

Your 7 DE Admin. Code 1102 application may include one AQM-6: Air Emissions Modeling Application form for EACH process being applied for. This form includes emissions modeling information. This form is optional; however, completing this form may expedite processing of your permit. Instructions for Form AQM-6 are also provided.

Please note that if your company is submitting a permit application for the first time, you must complete an Environmental Permit Application Background Statement.

AQM CO2 Permit Application

All Application Forms should be mailed to:

Division of Air Quality
State Street Commons
100 West Water Street
Suite 6A
Dover, Delaware 19904

All checks should be made payable to:
State of Delaware

For a list of permit fees, click here.
For help calculating your permit fees, click here

For more information, contact:

Engineering and Compliance
(302) 323-4542
daqpermittinginfo@state.de.us

rev. 09/19/2017

site map   |   about this site   |    contact us   |    translate   |    delaware.gov